All logs must be bucked from live trees.
None of the following defects allowed.
1. Blister Rust
2. Metal Stain
3. Pencil Rot
(All rot must be confined to the center and not exceed 20% of top diameter).
4. Double Ends
5. Dead wood or blue stain wood
6. Spiral Seams
(Tight straight not to exceed 1" in width allowed).
7. Sheared Logs
8. Ant Holes
9. Shake
Grades: SELECT, #1, #2, #3, #7, #8, PALLET
* For Current Prices Call 207-342-5221 *

For allowable defects that include sweep, seams and rot.
Deductions will be taken for loss of footage.
 
Logs cut during the months of May thru September
Must be delivered within 5 days of harvesting to assure freshness.

All grade prices subject to change without notice.
All butt logs must be sawed square with all broken hinge removed.
All logs scaled with International 1/4" rule.
Loads must contain 60% 16' logs.
All culls must be picked up within 12 days or 
Robbins Lumber will dispose of them at their discretion.

  Select # 1 #2
Min Diam. 14" 12" 10" in 12'&14'    9" in 16'
Length 12',14',16' 12',14',16' 12',14',16'
Trim 6" 6" 6"
Sweep 2" in 16'  1" in 12' 2" in 16'  1" in 12' 2" in 16'  1" in 12'
       
       
Knots All knots 1/2" or less  All knots 1/2" or less  3" red knot, 1" black knot
  disregarded and free of disregarded.  Otherwise  not restricted in number.
  defects. restricted to (4) 3" red knots.  
       
Rot     Center rot not to exceed
       20% of top diameter
Seams      

 

  #3 #7
Min Diam. 8" 6 & 7"
Length 10',12',14',16' 12',14',16'
Trim 6" 6"
Sweep 3" in 16'  1" in 12' None
     
     
Knots 4" red knot,2" black knot, not Not to exceed 1"
  restricted in number.  
     
     
Rot Center rot not to exceed  None
   20% of top diameter  
Seams Tight straight no spiral seams None

 

  Pallet 8'
Min Diam. 7" 8-20"
Length 12',14',16' 8'
Trim 6" 6"
Sweep 3" in 16'  1" in 12'  
    2" allowed in 8' will deduct
    for loss of footage
Knots not to exceed 4" red knot 2" black, 4" red
  or 4" black knot.  
     
     
Rot Center rot not to exceed   Heart Rot- Not to exceed 
   20% of top diameter 10% scale diameter
Seams Tight straight no spiral seams